The Zing MPS is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction. Because the abduction pivot point is in alignment with the natural hip pivot of the user, the entire leg abducts eliminating the need to adjust foot plates or knee pads. Not only does this provide anatomically correct abduction, but rotating hip guides and only having to loosen a single knob per leg enables simple and intuitive standing in abduction.
Size 1 – infancy to 44″, 70 lb weight capacity
Size 2 – 40-60″, 154 lb weight capacity
- Zing MPS Size 1
- Zing MPS Size 2
- Detaljnije na web stranicama proizvođača
Zing MPS Size 1
Size 1 fits: children from infancy up to 44” and up to 70 lbs.
Options:
The Zing is available in four color options: green, purple, white, or orange
The EasyStand Zing MPS base includes:
- four locking swivel casters
- foot operated gas spring
- mast receiver with prone position lockout
Product Description
The EasyStand Zing Multi-Position Stander (MPS) is the only pediatric stander that allows a child to seamlessly go from a full supine to prone position without having to change, turn or flip pads and foot plates or transfer a child in and out of the stander. In one fluid motion, the child can be positioned between supine, upright and prone positions.
But the EasyStand Zing’s advantages aren’t limited to its groundbreaking frame design, it’s the options that further set it apart from all other pediatric standers. Leg abduction up to 30 degrees in each leg is possible, multi-adjustable tray is angle adjustable and swings away both to the left and right while still remaining attached to the frame. Leg length discrepancies and hip and knee contractures are accommodated with multi-adjustable foot plates, independent adjustable calf pads and multi-adjustable knee pads. The Zing MPS, Supine, MPS TT, Supine TT standers all have a very comfortable flat to load transfer height of 32″
The modular design of the EasyStand Zing helps ensure the correct stander is ordered for each child. Tool free adjustments make standing in the Zing easier, which often leads to increased standing program compliance. The Zing MPS size 1 has a terrific user range, fitting most children from infancy to 44” and up to 70 lbs.
Specifications
Height Range
| 18″-44″ | 51-112cm | ||
| Weight Limit | 70lbs | 32kg | |
| Transfer Height (Horizontal Position) | 32″ | 81cm | |
| Pelvic Support to Foot Plate Range | 7″-22″ | 18-56cm | |
| Upper Body Support Height Range | 4″ | 10cm | |
| Kneepad Depth Range | 5″ | 13cm | |
| Kneepad Inside Width (extra small) | 2.5″ | 6cm | |
| Kneepad Inside Width (small) | 3.5″ | 8cm | |
| Kneepad Dimensions (extra small) | 4″x3.25″ | 10x9cm | |
| Kneepad Dimensions (small) | 4×4″ | 10x10cm | |
| Kneepad Height Range | +/- .75″ | +/- 2cm | |
| Multi-Adjustable Kneepads Width Range (extra small) | 4-9″ | 10-23cm | |
| Multi-Adjustable Kneepads Width Range (small) | 4.5-9″ | 11-23cm | |
| Multi-Adjustable Kneepads Height Range | +/- .75″ | +/- 2cm | |
| Weight of basic unit | 55lbs | 25kg | |
| Frame Footprint – Caster-to-Caster | 20″x28″ | 51x71cm | |
| Frame Footprint – Maximum Dimensions | 21.5″x29.5″ | 55x75cm | |
| Upholstery | Black nylon/Neoprene or Molded Urethane | ||
| Frame Colors | Green, Purple, White, or Orange | ||
| Casters and Wheels Diameter | 3″ | 8cm | |
| Lift Mechanism | Gas Spring | ||
| Lift Options | Dual Control or Lockout Knob | ||
| Supine Positioning | 0-90° | ||
| Prone Positioning | 20° | ||
| Leg Abduction | 30° per side | ||
| Foot Straps, extra small – fits foot height of | 1.5-3” | 4-8cm | |
| Foot Straps, small – fits foot height of | 3-6″ | 8-15cm | |
| Secure Foot Straps – fits foot height of | 3-6″ | 8-15cm | |
| Foot Plate Size 6″Lx3″W | 6″Lx3″W | 15x8cm | |
| Foot Plate Size 7.75″Lx3.25″W | 7.75″Lx3.25″W | 20x9cm | |
| Foot Plate Size 9.75″Lx4″W | 9.75″Lx4″W | 25x11cm | |
| Foot Plate Platform | 8″Lx12″W | 20x30cm | |
| Multi-Adjustable Foot Plates – Plantar/Dorsi | +/- 20° | ||
| Multi-Adjustable Foot Plates – Fore/Aft | +/- .75″ | +/- 2cm | |
| Multi-Adjustable Foot Plates Rotation | 30° left/right | ||
| Shadow Tray Size | 11×19″ | 28x48cm | |
| Shadow Tray Height Range | 3″ | 8cm | |
| Shadow Tray Fore/Aft Range | 0-10″ | 0-25cm | |
| Swing-Away Tray Size | 11×19″ | 28x48cm | |
| Swing-Away Tray Height Range | 3″ | 8cm | |
| Swing-Away Tray Fore/Aft Range | 4-9″ | 10-23cm | |
| Swing-Away Tray Angle Adjust Range | 40° inclines to -90° | ||
| Hip Support Pad Size | 3.5″Hx3.5″W | 9x9cm | |
| Hip Supports Width Range | 6-10″ | 15-25cm | |
| Lateral Support Pad Size | 3.5″Hx3.5″W | 9x9cm | |
| Lateral Supports Width Range | 7-11″ | 18-28cm | |
| Lateral Supports Height Range | 3.5″ | 9cm | |
| Lateral Supports Fore/Aft Range | 1″ | 3cm | |
| Planar Pelvic Support Pad 5×7″ | 5×7″ | 13x18cm | |
| Planar Pelvic Support Pad 5×9″ | 5×9″ | 13x23cm | |
| Form to Fit Pelvic Support Pad 5×7″ | 5×7″ | 13x18cm | |
| Form to Fit Pelvic Support Pad 5×9″ | 5×9″ | 13x23cm | |
| Planar Upper Body Support Pad 5×7″ | 5×7″ | 13x18cm | |
| Planar Upper Body Support Pad 5×9″ | 5×9″ | 13x23cm | |
| Form to Fit Upper Body Support Pad 5×7″ | 5×7″ | 13x18cm | |
| Form to Fit Upper Body Support Pad 5×9″ | 5×9″ | 13x23cm | |
| Chest Pad | 3″Hx8″W | 8x20cm | |
| Chest Strap (Pad Size) | 5×8″ | 13x20cm | |
| Chest Strap – User Circumference | Up to approx 24″ | Up to approx 61cm | |
| X-Style Chest Vest – Extra Small | 9.5″Lx9″W | 24x23cm | |
| X-Style Chest Vest – Small | 11″Lx9.5″W | 28x24cm | |
| Head Support – Height Range | 8″ | 20cm | |
| Head Support – Depth Range | -2.5″ to +1.5″ | -6 to +4cm | |
| Head Support Cushion Size – Extra Small | 5″Hx8″W | 13x20cm | |
| Head Support Cushion Size – Small | 6″Hx10″W | 15x25cm | |
| Flat Headrest | 5″Hx7″W | 13x18cm | |
| Positioning Belt – Hip Circumference | Up to approx. 24″ | Up to approx. 61cm |
Catalogs & Manuals
Poreklo: USA, Cena :
- EasyStand Zing MPS Size 1, osnovni model: 1560 USD + PDV (ako se placa) ... Napomena: Dodaci se posebno plaćaju. Proveriti cene. ... Azurirano: 2017-01-21
u Srbiji u dinarima
nazad na početak: Zing - multifunkcionalna stolica
Zing MPS Size 2
Fits individuals from 40-60″ and up to 154 lbs.
Product Description
E0641: Standing frame/table system, multi-position (e.g. three-way stander), any size including pediatric, with or without wheels
The Zing MPS Size 2 is a larger version of the Zing MPS size 1. The Zing MPS provides a new therapeutic opportunity to stand in supine, upright and prone without having to transfer the child in and out of the stander to switch between supine or prone standing. No need to flip pads, foot plates and trays to change positions. Tool-free adjustments and/or removal of support and positioning components adds to the ease of use.
30 degrees of independent leg abduction (60 degrees bilaterally)
A simple knob allows the entire leg to abduct up to 30 degrees, no need to re-adjust the foot plates or knee pads.
Unique Lift Mechanisms
The base unit is equipped with a prone position lockout to prevent inadvertently going past vertical. A gas spring lift lockout is available to prevent any inadvertent position changes which can be useful if other children are present during standing sessions. The Dual Control enables position changes by foot pedal or hand control.
Swing-away Tray
Multi-adjustable tray can swing either direction while remaining attached to the unit or it can be removed completely. This tray, when swung away but attached on one side of the stander, is close and well within reach once a transfer has been completed. The transfer height of the Zing MPS size 2 is a comfortable 31″ from the floor surface.
Remarkably Modular
With 75 support and positioning components/accessories, it can be configured as a simple stander or fit a child with more complex needs. The support and positioning components available (independent and multi-adjustable foot plates, knee pads, calf pads and floating hip guides) make the Zing MPS one of the few multi-position standers that can accommodate contractures on one or both sides.
Catalogs & Manuals
Poreklo: USA, Cena :
- EasyStand Zing MPS Size 2, osnovni model: 0 USD + PDV (ako se placa) ... Napomena: Proveriti ... Azurirano: 2021-10-20
u Srbiji u dinarima
nazad na početak: Zing - multifunkcionalna stolica